in How to use RIG "Stopwatch" displays the hour, minute and second. You can start/ pause/ resume/ reset a stopwatch by tapping the buttons below: Setting: Go to "Home Screen", press the Side Button, then enter "Stopwatch" and tap "Start" to start timing. Tap again to pause or "Reset" button to back to default. Timer: "Timer" gives you 6 default time durations and a custom option, you can set a timer quickly If you want to start a default duration, tap it and it start timing automatically. If you want to creat a custom timer, tap "Custom" button, set hours, minutes, or seconds, and start it. In both ways, you are allowed to pasue/ resume/ repeat it ( Timer automatically records your last custom） Setting: Go to "Home Screen", press the Side Button, then enter "TImer" and tap default durations or "Custom", then start a default one or custom one

Back to How to use RIG Watch RIG can help you find your phone if it's nearby and connecting with your watch. Going to "Control Center" or "Function Screen", then tap "Find Phone". Your phone make a sound (if it's not in "Silent Mode") and vibrate after counting down . You can exit it by swiping to right from the left edge or tap the "Cancel" button while counting down. You can find your phone in these two ways: Swipe down to go to "Contol Center" from face, tap "Find Phone"; Press the Side Button to go to "Function Screen" , and tap "Find Phone". You can find your phone in these two ways: Swipe down to go to "Contol Center" from face, tap "Find Phone"; Press the Side Button to go to "Function Screen" , and tap "Find Phone".

Back to How to use RIG if you can not see the feature of female on the app dashboard,please tap''Mine'',Click upside image to profile setting Gender is female. This feature is mainly for females. If your gender is set to male, this module will not be displayed in the "Dashboard" of the App. When the device is connected to the App, You can set the personal physiological status in the App (as shown in Figure 3-5-2). App uses the data to predict and remind You of the physiological status. The personal information status in the "female" function includes four types: "Record menstruation cycle", "Trying to get pregnant", "pregnant" and " mother ". Record menstruation cycle: you selects "Record menstruation cycle" and fill in the period length,cycle length, and last period started. Based on the data provided by you, the device predicts your current situation and displays the words "safe day" and "ovulation period" on the interface APP open "Veepoo Health" → connect device → "Dashboard" → Tap "Female" → Tap the "calendar" icon in the upper right corner → Tap "Record menstruation cycle" → fill in the data (the time of the last menstrual period can be intelligently predicted) → Tap " Save" Trying to get Pregnant: when you choose "trying to get Pregnant" and need to fill in the period length , cycle length. The device predicts the current situation and the interface displays the words "pregnant probability X% ovulation period", pregnant probability X% safe" and other words Open the "Veepoo Health" to connect to the device, Tap on the "Dahboard", Tap on "Female", Tap on the "calendar" icon in the upper right corner, Tap on "trying to get Pregnant", fill in the data, and Tap on "Save". Pregnant: when you choose "pregnant" and need to fill in the expected date of childbirth. Based on the data provided, the device predicts the current situation and the interface displays the words "XX days until chidbirth' APP: open "Veepoo Health" → connect the device → Tap "Dashboard" → Tap "female" → Tap the "calendar" icon in the upper right corner → Tap "pregnant" → fill in the data → Tap "save" Mother: when you select the "mother " stage, and you fills in the gender , Baby birthday, and last period length, cycle length . The device predicts the current situation of you and the interface displays the words "Ovulation Day", "Ovulation Period", etc. APP Open "Veepoo Health" to connect to the device, Tap "Dashboard", Tap "Female", Tap the "calendar" icon in the upper right corner, Tap "Mother", fill in the data, and Tap "Save" Bracelet Notification: Open "Veepoo Health" → connect device → Tap "Dashboard" → Tap "female" → set the "Bracelet notification" switch setting personal profile

Back to How to use RIG If you want to position your phone for a photo and take a photo from distance, you can use your watch to take the photo while connection between your watch and phone is stable. Android: Connect your watch; Veepoo Health: Go to "Mine" > "My device" > "Take photo", your watch goes to "Camera" automatically ( You need to allow access to "Camera" "Photo" and "Storage" permissions first). Then tap the screen or shake your watch. Watch RIG: Swipe down to go to "Control Center" from face, tap "Camera" button and camera screen appears on your phone. Take the photo by tapping watch display or shaking it. iOS: Connect your watch; Open your Camera on your phone; Swipe down to go to "Control Center" from face, tap "Camera" button and take the photo by tapping watch display or shaking it.

Back to How to use RIG You may wake your watch display by turning your wrist to let your watch facing up without pressing the Side Button. Then let your watch fall asleep again by turning wrist to make it not facing up. Besides, you have access to setting how sensitive the function is and when it works on "Veepoo Health" APP :Veepoo Health: Connect your watch, and go to "Mine" > "My device" > "Turn wrist detection". Tap "Save" button after setting "Start time", "Stop time" and "Sensitivity Watch RIG Setting: find the Setting in watch interface,tap ''Settings''-''Switch''-Tap ''Wake on Wrist Turn.

Back to How to use RIG If the "Silent Mode" is turned on, your watch does not remind you with vibration (Figure 3-4-9). Setting way: Swipe down to go to "Dashboard" from face, tap "Silent Mode" button to choose whether activates it or not.

Back to How to use RIG Brightness Swipe down to go to "Contol Center" from face, tap "Screen & Display" button, then Tap the "+" or "-" buttons below "Brightness" to adjust Auto-Lock Watch RIG: Swipe down to go to "Contol Center" from face, tap "Screen & Display" button, then Tap the "+" or "-" buttons below "Auto-Lock" to adjust. APP:Veepoo Health: Connect your watch, and go to "Mine" > "My device" > "Screen-On time". Tap "Save" button after setting.

Back to How to use RIG Both Chinese (Simplified) and English you can choose as system language. Setting way: Press the Side Button and go to "Settings" > "Language". Tap to switch language.

Back to How to use RIG Setting your own steps goal. Once you reach it, your watch will notify you and give you a medal to inspire you Open "Veepoo Health", go to "Mine". Tap "Steps goal" and change the value before tapping "Save" button.

Back to How to use RIG Your watch can remind you to do more movements when a small amount of exercise . Time duration of reminder as well as interval can only be setting on "Veepoo Health" APP Setting :Veepoo Health: Connect your watch, and go to "Mine" > "My device" > "Sedentary setting". Tap "Save" button after setting "Start time", "Stop time" and "Reminder interval". Watch RIG: Find Settings on the Watch interface,tap Switch,Tap Movement Rminder.

Back to How to use RIG Swiping down from your watch face to "Control Center" to check your Bluetooth status. You can let your watch alert you by vibrating and notification when it loses connection with your phone

Back to How to use RIG Your watch will notify you when there is a notification from your phone which your watch connects with. You can choose which Apps', including message, phone, WeChat, Twitter and others, notificaitons appear on your watch in "Message notification" ("Veepoo Health") or "Settings" > "Notifications" (Watch RIG) Setting App: Veepoo Health: Connect your watch; Tap the "Allow" button when "Veepoo Health" asks for your phone's Notification permission. After this and go to "Mine" > "My device" > "Message notification". Now switch on/ off the App as you need. Watch RIG: You must allow the request of Notification permission first before setting it in your wacth.*** Press the Side Button and go to "Settings" > "Notifications". Tap switch after the App to switch on or off.

Back to How to use RIG You can set up to 20 alarms on "Veepoo Health" and your watch will remind you as setting Set an alarm: Open "Veepoo Health" and connect to your watch. Go to "Mine" > "My device", tap "Alarm setting", and add an alarm by tapping the "+". Switch off/delete an alarm: Open "Veepoo Health" and connect to your watch. Go to "Mine" > "My device", tap "Alarm setting". Slide the alarm to the left (or tap the "Delete alarm clock" button in the alarm) Alarm includes reminder (which you can set a certain date, and it can't repeart and switch on if it's expired) and alarm (which you can make it remind you repeatedly and switch on or off as you need)

Back to How to use RIG Watch RIG keeps working while you're sleeping, and it can track your sleep. When you wake up, go to "Sleep" to learn how much sleep you got. What you can see in your sleep report On your watch, "Sleep" shows your total and deep sleep duration. For more details, you can open "Veepoo Health" on your phone. It displays multiple data not only those data showing on your watch but also other vital data: Sleep quality: It's affected by your deep sleep, times you wake up, how long you are awake and so on. Sleep Duration: It shows the time you wake up and fall asleep as well as how much sleep you have. Wake-up times: It shows how many times you wake up during sleeping. Insomnia: If you have Insomnia, you may be difficult to fall asleep. REM (Rapid Eye Movement) sleep: During REM, your eyeballs move rapidly under your eyelids. Most people are dreaming in this stage. Light Sleep: It's a non-REM sleep compared with deep sleep which is between deep sleep and awakening. Deep Sleep: It's the key stage to relieve stress. The more deep sleep you get, the better quality it is. Sleep efficiency: It refers to how long you fall asleep again after sleep disruption. Set up "Sleep" on Watch RIG Press the Side Button, go to "Settings". Tap "Health & Monitor", switch on "All Day Monitor" in "Sleep" and "Monitor At Night" in "Blood Oxygen". Set up "Sleep" on Watch RIG Press the Side Button, go to "Settings". Tap "Health & Monitor", switch on "All Day Monitor" in "Sleep" and "Monitor At Night" in "Blood Oxygen". View your sleep report On Watch RIG Press the Side Button. Swipe left or right to "Sleep" (or press the Side Button and tap "Sleep"). In Veepoo Health Connect to your watch and sync your data. Go to "Dashboard" and tap "Sleep". Setting Your Sleep Goal

Back to How to use RIG Pedometer shows your total number of steps, distance and calories that day. Tip: It is cleared every day at 0:00. You can connect to "Veepoo Health" to sync all data. There are two ways to access to "Pedometer": Swipe right from watch face to access to "Pedometer" ， After going to watch face, press the Side Button and tap " Pedometer".

Back to How to use RIG You can adjust your breath to make your heart rate back to normal with "Breathe" Setting: Press the Side Button, tap "Breathe" and adjust how long the process is as you like. Then follow the direction to inhale and exhale

Back to How to use RIG Test Bood Oxygen Test Will Automatically After Entering the "Blood Oxygen" Interface, the Blood Oxygen Level Will Be Displayed During the Process If the test fails, the "unsuccessful" interface will be displayed Watch RIG: app Veepoo Health: the dashboard display blood oxygen and apnea data and data distribution graph. APP Setting: Veepoo Health: Veepoo Health: Open "Veepoo Health" to connect to the device, Tap "My Device", Tap "Switch Setting",Tap''Blood oxygen nighttime monitoring''.Device data is cleared at 0:00 on the day. Watch RIG Setting: Press the Side Button, Press the Side Button again → Tap "Blood Oxygen" https://video.wixstatic.com/video/a27d24_4e56ab22af1e4472a3b4d9ce1f6fbf8d/360p/mp4/file.mp4